Pianos regularly make movers annual list of products that are most regularly damaged. Grand pianos are specifically troublesome. Practicing the following procedures for dismantling, cushioning and loading grand pianos will avoid damage, lower claims expense, and enhance customer complete satisfaction.
1) At least 3 people are required to handle an infant grand piano. If the child grand piano needs to increase or down stairs or if a full or show grand piano requires to be transported, a minimum of 4 individuals are needed.
2) Always finish a precise and thorough inventory. It might be required or more effective to use a visual inventory to effectively explain and show pre-existing damage.
3) As numerous parts are dismantled, please place all hardware in an effectively labeled parts bag and after that put the parts bag in a "Parts Box".
4) Get rid of the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a clean furniture pad.
5) Disconnect the cover by removing the hinge pins. Have someone wiggle the lid, holding it opposite the hinge, while a 2nd individual works the pin loose. Please beware not to damage the wood with the pliers or with the pin itself. If needed, cover the jaws of the pliers with a small fabric to assist avoid damage to the wood. Wrap the lid in a tidy furnishings pad.
6) Get rid of the prop that holds the cover open and wrap it in a clean furniture pad. The prop has a hinge pin and remains in two pieces.
7) Remove the pedal assembly and cover it in a clean furnishings pad. The braces at the rear of the assembly rest in slots at each end. When eliminating the screws, please beware not to drop the braces. In addition, please be specifically cautious with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by placing a piece of masking tape with the suitable number on each rod. Note: If masking tape is unavailable, please use properly labeled parts bags for this function. When reassembling at destination, please make sure to put the rods in the correct order so that the pedals will work effectively.
8) Pad the piano by placing a clean rolled furniture pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to avoid it from tumbling open while you manage the piano. Keep in mind: Please guarantee that the surface of the piano is dust-free before padding it.
9) Position a piano board and attach the straps so that it is ready to receive the piano. The raised brace on the piano board should be at the keyboard end of the piano.
10) Eliminate the left front leg by positioning one person below the piano at the left end of the keyboard. Be sure to have two individuals lifting the corner of the piano while the third individual removes the leg. Keep in mind: Please be sure to keep in mind which legs were removed from which positions considering that some pianos have legs that are not interchangeable.
11) Place the piano on Bonuses the piano board by reducing the "leg-less" end onto the board. Please be sure to lift the entire piano slightly while completing this maneuver to prevent undue pressure on the staying, connected legs as the piano pointers. Be sure that the piano is centered snugly versus the brace at the end of the piano board.
12) Get rid of the 2 remaining legs and wrap them in tidy furnishings pads. These legs are kept in location by a "essential and slot" arrangement. To remove the leg, slide it inward towards the center of the piano up until it comes out of the slot.
13) Secure the piano to the piano board by bringing the ends of the straps together and attaching them. Location folded burlap pads over the furniture pads however under the straps to offer additional defense to the edges of the piano. To avoid the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.
14) To move the piano over a flat, level surface, tilt the piano and piano board and location a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, use the piano board as a skid. After adequately padding the stairs for protection versus home damage, position the keyboard end of the piano toward the bottom of the stairs. Connect a hump strap to the leading end of the piano board to prevent the piano from slipping.
16) To pack the piano, leave it on the piano board and location it in a tier as the first base product with the keyboard dealing with the wall of the preceding tier. The very best location to load the padded cover is between the piano and the preceding tier or in between the wall and the piano.
Grand pianos represent a considerable obstacle, they can be moved without damage by utilizing common sense and practicing the procedures noted above.